Turbochargers and Engines

One of the surest ways to get more power out of an engine is to increase the amount of air and fuel that it can burn. One way to do this is to add cylinders or make the current cylinders bigger. Sometimes these changes may not be feasible -- a turbo can be a simpler, more compact way to add power, especially for an aftermarket accessory.

Turbochargers allow an engine to burn more fuel and air by packing more into the existing cylinders. The typical boost provided by a turbocharger is 6 to 8 pounds per square inch (psi). Since normal atmospheric pressure is 14.7 psi at sea level, you can see that you are getting about 50 percent more air into the engine. Therefore, you would expect to get 50 percent more power. It's not perfectly efficient, so you might get a 30 to 40 percent improvement instead.

One cause of the inefficiency comes from the fact that the power to spin the turbine is not free. Having a turbine in the exhaust flow increases the restriction in the exhaust. This means that on the exhaust stroke, the engine has to push against a higher back-pressure. This subtracts a little bit of power from the cylinders that are firing at the same time.­

Related Products: Turbocharger Parts, Turbochargers and Engines, Supercharger vs Turbocharger, Turbocharger, Turbocharger Working principle, What is a Turbocharger, Diesel Turbocharger of Various models, Turbo Parts, Cartridge CHRA of Turbocharger, Turbine and impeller wheel, Turbocharger Kits, Turbo Compressor Wheels, Turbo Repair Kits, Turbo Thrust Bearings, Compressor wheel, Turbo Piston Ring, Turbocharger